Part #ANV-120.00

STEEL RIVETING BLOCK

US$ 44.95

Dimension: 2⅝” x 1½” x ⅜”
Size: 18, 16, 14 and 12 gauge wires, 3 commercial sizes of eyelets (small, medium and large) and tubing up to ⅛” OD

Another great tool for Cold Connection.
This MULTI-FUNCTIONAL block has been well thought out for all your riveting needs.

You can make your own rivets with wires, tubes and Head Pins.
This gives you the ability to rivet on CURVED and HARD to reach areas.

No more guessing on the length of wire to be cut.
The 4 holes in the middle were drilled to 1.8mm which provides a perfect length to work on both ends of the wire.

With the 4 divots and the 3 circles on the Block, the rivets and eyelets are well supported during hammering which produces a smooth and rounded finish on both sides.

The divots and double circles on both sides of the block are for making rivets on curved or uneven surface when mounting in your vice.

The 2 through holes at the end of the block are for making Head Pins.
Cut a length of wire required, balled up one end with torch.
Drop the pin through the appropriate size hole, hammer and shape the head as desired.

SHIPPING OPTIONS:

SMALL PACKET vs EXPEDITED SHIPPING with TRACKING & INSURANCE

I offer low cost shipping via Canada Post Small Packet that does not include TRACKING or INSURANCE. This means if your package does not arrive, (which usually takes 1 – 5 weeks) I am unable to track it and am not be responsible to replace it.

Please note that should you require TRACKING and INSURANCE for your order, Please contact us for shipping upgrade.

 – +





STEEL RIVETING BLOCK INTRODUCTION